Setting According To Your Preferences - Panasonic 1M Operation Manuals

Setting according to your preferences

You can set the ringtone volume etc. according to your preferences.
Setting
Ringtone Volume
General
Announcement
Touch Sound
Earthquake Setting*
Ringtone
Accepting
Reject
calls from
Calls
other
apartments/
Ringtone
Ringtone
（*1）
Received
Call Time
Excuse Tone
Away-from-home
Message
Pretend To Be
Out Message
Pretend To Be
Out Indicator
Yuttari On/Off
Security Number
Setting
Security Off
Sound
Security Alarm
Delay
Security
Preliminary
Alarm
46
This sets the volume when a call is made from the Main
Entrance, the Unit Entrance or the manager room.
This sets whether to emit a ring for a general announcement.
This sets whether to emit touch sounds when the touch panel
is operated or a button is pressed.
This sets the volume of the earthquake alarm for Intensity 4,
1
Intensity 3 and Erroneous reports.
This sets the ringtone and number of rings that sound when a
call is made from the Lobby Phone (Main Entrance), the
entrance (Unit Entrance), or the Manager Room.
This sets whether or not to receive messages from the housing
information board of Other Units.
This sets the ringtone and number of rings when a call is made.
This sets the Received Call Time when a call is made from the Main
Entrance, the Unit Entrance, another Unit or the Manager Room.
This sets the excuse sound emitted from the Master when the
excuse function is used. (Excuse function
This sets the answer message for when you are not at home.
This sets the answer message that plays from the Master when you are
using the Pretend to be out function. (Pretend to be out function
This sets whether to activate a function which,when a call is
made by a visitor, displays
response to an operation, plays the Not-home message.
(Pretend to be out function
This sets whether always to use Yuttari when calling.
This sets the private security number for disarming the security
alarm and security alert.
This sets whether the Master emits a sound when the alarm is
set or disarmed on the security system.
This sets the time between the security alarm being set and the
system entering the alarmed state. (A time can be set for each
security system.)
●This can be set if the "Permit changes to delay setting" is set
Note
to "Yes" in Installation Setting.
For further information please contact the store responsible
for installation or the service and maintenance company.
●If the "Permit changes to delay setting" has been set to "No",
the "Security Alarm Delay" indicator does not appear.
This sets the time between the Security system being tripped
and the Security Alert (Security Preliminary Alarm) sounding.
(A time can be set for each security system.)
●This can be set if the "Permit changes to delay setting" is set
Note Note
to "Yes" in Installation Setting.
For further information please contact the store responsible
for installation or the service and maintenance company.
●If the "Permit changes to delay setting" has been set to "No",
the "Security Preliminary Alarm" indicator does not appear.
Description
page 31)
on the screen and, in
page 32)
Default
High
On
On
Medium
Lobby Phone: Melody 1
Number of rings: Ring continuously
Entrance
(Unit Entrance): Melody 2
Number of rings: Ring once
Manager Room: Melody 4
Number of rings: Ring continuously
Accept Calls
Melody 5
Number of rings: Ring once
30 sec.
Telephone 1
Fixed message 1
Fixed message 2
page 32)
Yes
Off
No
Imitation Sound
Security 1/
Security 3/
Security 4: No
Security 2:
60 seconds
Security 1/
Security 3/
Security 4: No
Security 2:
60 seconds
Page
52-53
54
55-57
58-60
60
61-64