Panasonic AFPE224300 User Manual page 224

Table of MEWTOCOL-COM Communication Error
Error
Name
code
!21 NACK error
!22 WACK error
!23 Unit No. overlap
Transmission format
!24
error
Link unit hardware
!25
error
!26 Unit No. setting error
!27 No support error
!28 No response error
!29 Buffer closed error
!30 Time-out error
Transmission
!32
impossible error
!33 Communication stop
!36 No destination error
Other communication
!38
error
!40 BCC error
!41 Format error
!42 No support error
Multiple frames
!43
procedure error
!50 Link setting error
Transmission
!51
time-out error
Transmit disable
!52
error
!53 Busy error
!60 Parameter error
!61 Data error
Registration over
!62
error
!63 PC mode error
11-126
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Link system error
Link system error
Link system error
Link system error
Link system error
Link system error
Link system error
Link system error
Link system error
Link system error
Link system error
Link system error
Link system error
Link system error
A transfer error occurred in the received data.
A command was received that does not fit the format.
A command was received that is not supported.
A different command was received when processing multiple
frames.
A route number that does not exist was spacified. Verify the
route number by designating the transmission station.
Transmission to anather device not possible because
transmissition buffer is congested.
Transmission processing to another device is not possible.(Link
unit runaway,etc.)
Command process cannot be received because of multiple
frame processing.Or,cannot be received because command
being processed is congested.
Content of spacified parameter does not exist or cannot be used.
There was a mistake in the contact,data area,data number
desigination,size designation,range,or format designation.
Operation was does when number of registrations was exceeded
or when there was no registration.
PC command that cannot be processed was executed during
RUN mode.
Description