Yamaha AG200FZ Owner's Manual page 67

1
2
1. Adjusting nut
2. Locknut
3. Slide the rubber cover back.
4. Loosen the locknut at the brake le-
ver, and then fully turn the adjust-
ing bolt in direction (a).
PERIODIC MAINTENANCE AND ADJUSTMENT
2
3
(a)
1
1. Rubber cover
2. Brake lever free play adjusting bolt
3. Locknut
5. Disconnect the brake cable from
the front brake lever, then from the
brake camshaft lever.
1
2
1. Axle nut
2. Brake camshaft lever
7-33
6. Loosen the axle nut.
7. Lift the front wheel off the ground
according to the procedure on
page 7-32.
8. Remove the axle nut, pull the
wheel axle out, and then remove
the wheel.
To install the front wheel
1. Install the brake shoe plate into the
wheel hub so that the projections
mesh with the slots.
2. Lift the wheel up between the fork
legs.
TIP
Make sure that the slot in the brake
shoe plate fits over the retainer on the
fork leg.
2
EAU35041
3
4
5
6
7
8
9