Brake Light Switches; Checking The Front And Rear Brake Shoes - Yamaha AG200FZ Owner's Manual

Brake light switches

1
(b)
(a)
1. Rear brake light switch
2. Adjusting nut
The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, adjust the rear brake
light switch as follows, but the front
brake light switch should be adjusted
by a Yamaha dealer.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake light
switch in place. To make the brake light
come on earlier, turn the adjusting nut
in direction (a). To make the brake light
come on later, turn the adjusting nut in
direction (b).
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU22273
Checking the front and rear
brake shoes
2
Front
1. Brake shoe wear limit line
2. Brake shoe wear indicator
EAU22361 Rear
2
1. Brake shoe wear limit line
2. Brake shoe wear indicator
1
The front and rear brake shoes must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart. Each brake is provid-
ed with a wear indicator, which allows
you to check the brake shoe wear with-
out having to disassemble the brake.
To check the brake shoe wear, check
the position of the wear indicator while
applying the brake. If a brake shoe has
worn to the point that the wear indicator
reaches the wear limit line, have a
Yamaha dealer replace the brake
shoes as a set.
7-21
1
2
2
3
4
5
6
7
8
9