Kickstarter; Seat - Yamaha AG200FZ Owner's Manual

Kickstarter

1. Kickstarter
To start the engine, fold out the kick-
starter lever, move it down lightly with
your foot until the gears engage, and
then push it down smoothly but force-
fully. This model is equipped with a pri-
mary kickstarter, allowing the engine to
be started in any gear if the clutch is
disengaged. However, shifting the
transmission into the neutral position
before starting is recommended.
INSTRUMENT AND CONTROL FUNCTIONS
EAU13650

Seat

To remove the seat
1. Remove panels A and B. (See
page 7-7.)
2. Remove the bolts and pull the seat
off.
1
1. Bolt
EAU14001
1. Bolt
1
To install the seat
1. Insert the projections on the front
1. Projection
2. Seat holder
4-8
1
of the seat into the seat holders as
shown.
1
2
2
3
4
5
6
7
8
9