Replacing The Headlight Bulb - Yamaha AG200FZ Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Replacing the headlight bulb

If the headlight bulb burns out, replace
it as follows.
1. Remove the headlight unit by re-
1
moving the bolt.
2
3
4
5
1. Bolt
6
2. Disconnect the headlight lead con-
7 nectors, and then remove the
headlight bulb cover.
8
9
EAU24013
1
1. Headlight lead connector
2. Headlight bulb cover
1
3. Remove the headlight bulb holder
by turning it counterclockwise.
2
1. Headlight bulb holder
2. Headlight bulb cover
4. Remove the burnt-out bulb by turn-
ing it counterclockwise.
2
1. Headlight bulb
2. Headlight bulb holder
1
7-30
5. Place a new bulb into position, and
then secure it with the bulb holder.
1
6. Install the headlight bulb holder by
turning it clockwise.
7. Install the bulb cover, and then
connect the headlight lead con-
nectors.
8. Install the headlight unit by install-
ing the bolt.
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
2