j) Rear Cover
Removing the Rear Cover
1) To remove the rear cover [2], remove twelve screws [1].
k) Roll Feed Unit
Removing the Roll Feed Unit
MEMO:
Open/close the roll cover as needed.
1) To remove the roll feed unit, remove the roll holder, and then remove the left/right cover and rear upper cover.
2) Remove six screws [1] and one connector [2], and then the feed guide [3].
[1]
[1]
[1]
F-4-19
[2]
[3]
[1]
F-4-20
[1]
[2]
[3]
[3]
Chapter 4
4-11