Canon iPF780 Series Service Manual page 122

Chapter 3
c. Transporting by plane or ship or others or transporting in low temperature environment such as below freezing
Item
[Prep. MovePrinter] on the Main menu Perform [Standard].
Allowed tilting angle
Ink consumption
Ink drainage area
Ink tank
Separation of printer and stand
Maintenance cartridge
Replacement of consumable parts
Service support
Transportation procedure
1) Remove the paper and roll holder.
2) Select [Set/Adj. Menu] > [Prep.MovePrinter] > [Standard].
3) Press the [OK] key and perform transportation mode.
4) When the message completed the transportation mode appears, turn off the power, and remove the power cord and interface cable and check that the heads are
capped and carriage is locked.
5) Attach the cushioning materials and tape.
6) Unlock the casters on the stand, and then move the printer slowly by holding the carrying handles at the bottom.
If the printer is subjected to strong vibrations when it is moved, it can cause ink leakage or damage to the print head. Be sure to move the printer slowly and carefully.
3-4
Lengthwise: -30 to +30 degrees
Rotation: -10 to +10 degrees
Approximately 580g
Drain from all ink passage
Install.
They do not need to be separated.
Install.
There is no need to open a new maintenance cartridge.
However, if there is a message instructing to replace the maintenance cartridge or check the remaining ink,
replace with new maintenance cartridge before transporting.
There is no need to replace consumable parts.
No service support is necessary.
Description