Map Target Navigation - Dell iDRAC7 User Manual

Properties:
LogCreationClassName= CIM_RecordLog
CreationClassName= CIM_LogRecord
LogName= IPMI SEL
RecordID= 1
MessageTimeStamp= 20050620100512.000000-000
Description= FAN 7 RPM: fan sensor, detected a failure
ElementName= IPMI SEL Record
Commands:
cd
show
help
exit
version
• To clear the SEL:
delete /system1/logs1/log1/record*
The following output is displayed:
All records deleted successfully

MAP Target Navigation

The following examples show how to use the cd verb to navigate the MAP. In all examples, the initial default target is
assumed to be /.
Type the following commands at the SMCLP command prompt:
• To navigate to the system target and reboot:
cd system1 reset The current default target is /.
• To navigate to the SEL target and display the log records:
cd system1
cd logs1/log1
show
• To display current target:
type cd .
• To move up one level:
type cd ..
• To exit:
exit
215