Multiple Sld Views; Switch Device Control - ABB COM600 Series Operator's Manual

Versatile substation automation and data management unit

Hide thumbs Also See for COM600 Series:

Table of Contents

3.6.2.

3.6.3.

COM600 series 5.1

Operator's Manual

Figure 3.6.1-1 An example of the Single Line Diagram

The Single Line Diagram symbols are explained in detail in Appendix 14.1, Single Line

Diagram symbols.

Multiple SLD views

The main SLD (Master View or Substation View) is opened from the Single Line

Diagram link in the WebHMI toolbar, or by clicking the substation object in the substation

tree. If a Substation View has been defined, it will be displayed. Otherwise the Master

View will be shown.

Voltage level and bay SLD can be opened in the substation tree by clicking their names

in the tree (V1, H1, H2, and so on). The bay SLD can be also be opened by clicking the

bay local/remote symbol in the substation or voltage level SLD.

Switches (circuit breakers, disconnectors) can be operated using the Switch Device

Control dialog.

Only operators and administrators are allowed to control the

switches.

1MRS756705

SLD_example.png

Table of Contents