Building And Activating The Application - ABB COM600 3.4 User Manual

1MRS756738
4.8.
Station Automation COM600 3.4
Logic Processor User's Manual
Figure 4.7-1 Setting communication channel

Building and activating the application

1. Select Build -> Build Application to compile the project.
All objects belonging to the application is syntactically checked. Any potential error
messages or warnings are displayed within the message view.
2. If the project is built successfully without error, select Online -> Login to Applic-
ation to connect to the currently active application to the target device PLC and
thus changes into the online mode.
If there is no application running on target device before Login, the current active
application is downloaded to the device.
3. Select Online -> Start Application to start the program on the PLC.
The program starts running.
4. Select Online -> Logout Application to log out from the device and File -> Exit
to close the logic processor configuration tool.
Setting_communication_channel.bmp
41