Building And Activating The Application - ABB COM600 3.4 User Manual

1MRS756738
3.3.5.
Station Automation COM600 3.4
Logic Processor User's Manual
Figure 3.3.4-2 CoDeSys Device dialog
5. In Device dialog, click Scan network.
PLC Device on COM600 appears. The Node name is the COM600 computer name.
6. Select the PLC device and click Set active path.
This communication path is set as the active one, which means that all actions con-
cerning communication refers exactly to this path.

Building and activating the application

To log in to the device:
1. Select Build -> Build Application to compile the project. All objects belonging to
the application is syntactically checked. Any potential error messages or warnings
are displayed within the message view.
2. Select the device.
3. Select Online > Login to 'Application[Device:PLC Logic]'.
Select_device.bmp
21