Creating Logic Configuration - ABB COM600 3.4 User Manual

4.4.
34
Station Automation COM600 3.4
Logic Processor User's Manual
Figure 4.3-1 Adding Logic Processor IED

Creating logic configuration

To build logic configuration:
1. Right-click on Logic Processor IED in SAB600 and select Logic Editor to launch
the CoDeSys programming environment.
2. The logic editor starts with a new project.
3. Select Add object from the Project menu.
4. Select POU on the left side of the Add Object dialog.
5. Enter a name "PLC_BreakerFailureProtection" for the POU and select the Program
radio button in the Type section.
6. Select Function Block Diagram (FBD) for the implementation language.
1MRS756738
Add_Logic_Processor_IED.bmp