Siemens SIWAREX WP231 Manual page 141

Command
code
82
83
Table 10- 2
Command
code
401
405
440
441
Table 10- 3
Command
code
451
452
453
454
Table 10- 4
Command
code
701
705
710
714
SIWAREX WP231
Manual, 07/2014, A5E31238908A-02
Command Description
Perform auto- Calculation of scale characteristic using the load cell parameters
matic calibration from data record 10. The calculated characteristic is entered
directly in data records 3 and 4 and thus immediately enabled
following execution of the command. The scale must be empty
when the command is executed.
Perform calibra- The command calculates the theoretical digital values in•relation
tion check to the calibration weights using the load cell parameters from data
record 10 and the adjustment weights 0, 1 and 2 from data record
3. These theoretical digits are output in data record 4. The func-
tion can be used to carry out a plausibility check for the calibration
digits in data record 3 which were determined when calibrated
using standard weights.
Commands 400 ... 449; log commands, statistics, logbook
Command
Generate log
Delete log memory
Reserve
Commands 450 ... 499: Trace commands
Command
Trace RAM on
Trace RAM off
Single trace RAM
Delete trace RAM
Commands 700 to 899: HMI display switching
Command
Increased resolution
Display current tare weight
Activate standard display
N process value (no write protec-
tion)
Description
Log current parameters relevant to the calibra-
tion
Delete all logs
Delete the logbook. Only permitted in non-
calibrated state.
Description
Start permanent tracing
Stop permanent tracing
Create single trace (current state)
Delete tracing memory.
Description
Enable increased resolution on the main dis-
play and the SecureDisplay (x 10), for duration
of 5 s
Display current tare weight on main display and
SecureDisplay
Enable standard display gross/net (main dis-
play and SecureDisplay)
Display net process weight on main display,
only permitted if OIML is not set as the regula-
tion code (main display and SecureDisplay)
Command lists
10.2 Command lists
Protected
P
Protected
P
Protected
Protected
P
141