Multiple Dial-Up Profiles; Enabling Or Disabling The Internet Connection - Nokia IP40 User Manual

set interface wan2 mode dialup connectondemand <disable |immediate |
activity>
For more information about dial-up commands, see the Nokia IP40 Security Platform CLI
Reference Guide Version 2.0
CLI Wizard
Use the following command to configure dial-up by using the CLI wizard:
wizard dialup
For more information about how to use other dialup commands, see the Nokia IP40 Security
Platform CLI Reference Guide, Version 2.0.

Multiple Dial-up Profiles

Nokia IP40 Security Platform supports 10 dial-up profiles. A round-robin mechanism is used to
choose the profiles for connecting to the Internet. By default, the first dial-up profile is used. On
failure of the first dial-up, the device attempts to use the successive profiles for successful
Internet connection.
Either dial-up or an out-of-band management (OOB) instance alone can exist on the device at
any given time.
Note
You can configure ten dial-up profiles. Only one profile will be active at a time. You cannot
configure dial-up for both primary and secondary Internet connections.

Enabling or Disabling the Internet Connection

You can enable or disable the Internet connection by using the following procedures:
To enable or disable the Internet connection
1. Choose Network from the main menu.
The Internet window opens.
2. Next to the Internet connection, do one of the following:
a. To enable the connection, click the adjacent sign (x) mark
b. To disable the connection, click the adjacent check mark.
Nokia IP40 Security Platform User's Guide v2.0
The button changes to a check mark, and the connection is enabled.
The button changes to sign (x) mark, and the connection is disabled.
Enabling or Disabling the Internet Connection
91