Nokia IP40 User Manual page 81

f. Enter the alternate DNS server (secondary) IP address.
4. To assign an IP address automatically by using DHCP, but not configure DNS servers
automatically, do the following:
a. Uncheck the Obtain DNS Servers automatically check box.
b. Enter the preferred DNS server IP address.
c. Enter the alternative DNS server IP address.
5. Select the Shape Upstream and Shape Downstream to enable traffic shaper.
6. Enter the Upstream Link Rate value in kbps.
7. Enter the Down stream Link Rate value in kbps, slightly lower than the Upstream Link Rate
value.
8. Enter the maximum transmission unit (MTU-1500)
9. Click Apply.
To use a cable modem connection
1. Select Cable Modem type Internet connection in procedure as described in
Configuring the Internet Setting"
The following window opens:
2. Enter the Host name.
This field is optional: some ISPs might require it, and they provide the host name.
3. Complete the remaining fields as per the information provided in the procedure
direct LAN connection"
4. Click Apply.
Nokia IP40 Security Platform User's Guide v2.0
on page 80.
on page 75.
Manually Configuring the Internet Setting
"Manually
"To use a
83