Arista DCS-7050QX-32S Quick Start Manual page 30

Step 7 Assign a password to the
Step 8 Configure a default route to the network gateway.
Step 9 Assign an IP address
Step 10 Save the configuration by typing write memory or copy running-config startup-config.
When the management port IP address is configured, use this command to access the switch from a
host, using the address configured in step 9:
Refer to the Arista Networks User Manual for complete switch configuration information.
26
admin
localhost(config)#username admin secret pxq123
localhost(config)#ip route 0.0.0.0/0 192.0.2.1
(192.0.2.8/24
localhost(config)#interface management 1
localhost(config-if-Ma1/1)#ip address 192.0.2.8/24
localhost#copy running-config startup-config
ssh admin@192.0.2.8
username with the username secret command.
in this example) to an Ethernet management port.
Quick Start Guide: 7000 Series 1 RU-Gen 3 Data Center Switches
Chapter 5: Configuring the Switch