Streetlight Mounting; Figure 10 Streetlight Mounting - ABB Tropos 1410 Installation Manual

Streetlight Mounting

You can mount the Tropos 1410 on the horizontal or angled arm of a streetlight.
a typical streetlight mounting installation.
Figure 10
Mount the Tropos 1410 on a streetlight
1. Select a mounting location. You can attach the unit to any streetlight arm with diameter 1" to
10".
Slip the flat portion of the clamp under the inner slot of the pole bracket.
2.
Use the clamp to attach the pole bracket to the arm, making sure that it is level. Depending
3.
upon the diameter of the arm, you may need to use a single small clamp, single large clamp,
or pair of large clamps joined together.
Attach the mounting bracket of the unit to the pole bracket with two 5/16-inch machine
4.
screws (refer to
— Insert one screw through the hole at the top of the mounting bracket to the hole at the top
Tropos 1410 Installation Guide
Streetlight Mounting
Figure 5 for the correct orientation):
of the pole bracket.
Chapter 2
Figure 10 shows
27