Figure 11
Connecting the Serial Cable
Connecting the Ethernet cable
Fit a standard outdoor Ethernet cable through the connector supplied with the Tropos 1410
1.
as shown in
2.
Follow the wiring diagram in
3.
Connect the RJ-45 connector on the cable to the RJ-45 plug on the Serial port of the Tropos
1410 and screw the cover onto the connector. Do not use tools to tighten the cover.
Table 4
Pin
1
2
3
4
5
Tropos 1410 Installation Guide
Routing the Data/Power Cable to the Tropos 1410
Serial port
Figure
12.
Serial Pin Assignments
Option 1 (one serial port)
RS232 TX or RS485 TXRX +
GND
RS232 RX or RS485 TXRX -
Power +
Power +
Ethernet port
Table
4.
Option 2 (two serial ports)
RS232 (port 1) TX or RS485 TXRX +
GND
RS232 (port 1) RX or RS485 TXRX -
not used
RS-232 (port 2) RX
Chapter 2
31