Mounting; Removal; Wall Mounting - ABB NE870 User Manual

Section 3 Interface Modules

Mounting

The unit can be mounted on a 35 mm DIN-rail, which is horizontally mounted
inside an apparatus cabinet, or similar. Snap on mounting as shown in
Mounting, 35 mm DIN-rail".
For proper vibration and chock performance ABB recommends standard top-hat
DIN-rail TH 35-15 according to EN 60715.

Removal

Press down the support at the back of the unit using a screwdriver as shown in
Figure

Wall Mounting

This unit can also be wall-mounted as shown in
Unit".
3BSE083159
Figure 10. Mounting, 35 mm DIN-rail
11.
"Figure 12. Wall Mounting the
"Figure 10.
23