Figure 20 Remote Mount The Ps079001 On A Wood Pole - ABB Tropos 1410 Installation Manual

Remote mount the PS079001 on a wood pole
Secure the PS079001 mounting plate to the pole by threading a 1/4-inch bolt through the
1.
hole in the clamp slot to the pole. The bolt should be at least 3 1/2 inches in length. Make
sure that the bracket is level
Connect the data and power output cable from the PS079001 LAN output port to the
2.
Ethernet port on the Tropos 1410.
3. Connect the AC power cable to the AC power source.
Note
When the PS079001 is remotely mounted, the data and power out cable supplied with the unit must be
replaced with an outdoor-rated Ethernet cable of sufficient length.
Figure 20
Tropos 1410 Installation Guide
Remote Mount the PS079001 on a Wood Pole
PS079001 mounting
plate
PS079001
Data and
power out
(to 1410
or BB 063001)
AC power
input
Data in
(Figure 20).
Chapter 3
44