Dell PowerEdge M1000e Reference Manual page 85

cfgNicIpAddress (Read or Write)
Specifies the static IPv4 address.
Description
String representing a valid IPv4 address. For example: 192.168.0.20.
Legal Values
•
Default 192.168.0.120
cfgNicNetmask (Read or Write)
The subnet mask used for IP address.
Description
This property is only valid if cfgNicUseDhcp is set to0(FALSE).
String representing a valid subnet mask. For example: 255.255.255.0.
Legal Values
255.255.255.0
Default
cfgNicGateway (Read or Write)
Indicates the gateway IPv4 address.
Description
The gateway IPv4 address used for static assignment of the RAC IP address. This property is only valid if
cfgNicUseDhcp is set to0(FALSE).
String representing a valid gateway IPv4 address. For example: 192.168.0.1.
Legal Values
192.168.0.1
Default
cfgNicUseDhcp (Read or Write)
Specifies whether DHCP is used to assign the IPv4 address. If this property is set to 1 (TRUE) then the IPv4
Description
address, subnet mask and gateway are assigned from the DHCP server on the network. If this property is set
to 0(FALSE), the user can configure the cfgNicIpAddress, cfgNicNetmask and cfgNicGateway
properties.
Legal Values • 1 (TRUE)
• 0 (FALSE)
0
Default
cfgNicMacAddress (Read Only)
The NIC MAC address in the format: dd:dd:dd:dd:dd:dd, where d is a hexadecimal digit in range 0 – 9, A — F
Description
String representing NIC MAC address.
Legal Values
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0(FALSE).
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0(FALSE).
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set to 0 (FALSE).
85