Racreset - Dell PowerEdge M1000e Reference Manual

Power Status
===============================================================================
Session Information
===============================================================================
Type User IP Address
SSH root 10.9.72.252
KVM root 169.254.31.30
===============================================================================
Sensor Information
===============================================================================
<senType> <Num> <sensorName> <status> <reading> <units> <lc>
<uc>
FanSpeed 1 Fan-1
FanSpeed 2 Fan-2
FanSpeed 3 Fan-3
FanSpeed 4 Fan-4
FanSpeed 5 Fan-5
FanSpeed 6 Fan-6
FanSpeed 7 Fan-7
FanSpeed 8 Fan-8
FanSpeed 9 Fan-9
<senType> <Num> <sensorName> <status> <reading> <units> <lc>
<uc>
Temp 1 Ambient_Temp
<senType> <Num> <sensorName>
PWR 1
PWR 2
PWR 3
PWR 4
PWR 5
PWR 6

racreset

Resets CMC. The reset event is logged in the hardware (SEL) and CMC (RAC) logs.
Description
To run this subcommand, you must have the Chassis Administrator privilege.
racadm racreset [-m <module> [-f]]
Synopsis
• -m — The values must be one of the following:
Input
– server–<n> — where n=1–16
– server–<nx> — where n=1–8; x = a, b, c, d (lower case)
= ON
Login Date/Time
11/28/2007 23:40:53
11/28/2007 18:44:51
OK
OK
OK
OK
OK
OK
OK
Not OK
OK
OK
<status>
PS-1 Online
PS-2 Online
PS-3 Online
PS-4 Slot Empty
PS-5 Failed
PS-6 Slot Empty
NOTE: After you run the racreset subcommand, CMC may require up to two minutes to return to a
usable state.
NOTE: There is a 100 percent fan request when the command is run against the servers.
NOTE:
– Multiple modules may be specified, such as -m <module1> -m <module 2>.
– -f option is used to force the reset and is available only with an -m option.
14495 rpm 7250 14500
14505 rpm 7250 14500
4839 rpm 2344 14500
14527 rpm 7250 14500
14505 rpm 7250 14500
4835 rpm 2344 14500
14521 rpm 7250 14500
1 rpm 7250 14500
4826 rpm 2344 14500
21 celcius N/A
<AC-OK status>
OK
OK
OK
N/A
OK
N/A
40
61