Dell PowerEdge M1000e Reference Manual page 60

Racdump includes the following subsystems and aggregates the following RACADM commands:
• General System/RAC information — getsysinfo
• Session information — getssinfo
• Sensor information — getsensorinfo
• Switches information (IO Module) — getioinfo
• Mezzanine card information (Daughter card) — getdcinfo
• All modules information — getmodinfo
• Power budget information — getpbinfo
• KVM information — getkvminfo
• NIC information (CMC module) — getniccfg
• Redundancy information — getredundancymode
• Trace log information — gettracelog
• RAC event log — getraclog
• System event log — getsel
racadm racdump
Synopsis
Input N/A
The following information is displayed when this subcommand is processed:
Output
• General system or RAC information
• Coredump
• Session information
• Process information
• Firmware build information
Example
racadm racdump
===============================================================================
General System/RAC Information
===============================================================================
CMC Information:
CMC Date/Time
Active CMC Version
Standby CMC Version
Last Firmware Update
Hardware Version
Current IP Address
Current IP Gateway
Current IP Netmask
DHCP Enabled
MAC Address
Current DNS Server 1
Current DNS Server 2
DNS Servers from DHCP
Register DNS CMC Name
DNS CMC Name
Current DNS Domain
Chassis Information:
System Model
System AssetTag
Service Tag
Chassis Name
Chassis Location
60
= Wed, 28 Nov 2007 11:55:49 PM
= X08
= N/A
= Wed Nov 21 21:37:56 2007
= 2
= 192.168.0.1
= 192.168.0.1
= 192.168.0.1
= 1
= 00:55:AB:39:10:0F
= 0.0.0.0
= 0.0.0.0
= 0
= 0
= cmc-servicetag
=
= PowerEdgeM1000eControlPanel
= 00000
=
= Dell Rack System
= [UNDEFINED]