Featurecard - Dell PowerEdge M1000e Reference Manual

Chassis management controller version 5.0 for dell poweredge m1000e racadm command line
Hide thumbs Also See for PowerEdge M1000e:
Table of Contents

Advertisement

Synopsis
racadm feature -s
racadm feature -d -c <featurename>
racadm feature -r -c ExtendedStorage
-s
Input
–Displays the status of active features.
-d
–Deactivates feature specified in -c option.
-r
—Reformats damaged or unformatted extended storage media.
-c
— <featurename> — must be one of the following:
flexAddress
flexAddressPlus
ExtendedStorage (with -d, or -r)
Display the current status of all chassis features:
Example
racadm feature -s
Deactivate the FlexAddressPlus feature on the chassis:
racadm feature -d -c FlexAddressPlus

featurecard

Description
Verifies proper SD card installation and displays the SD card status.
To use this subcommand, you must have the Chassis Configuration Administrator privilege.
racadm featurecard -s
Synopsis
-s — Lists active SD card features and SD card status.
Input
No feature card inserted — Action: To verify that the SD card was properly inserted, check the
Output
CMC. In a redundant CMC configuration, make sure the CMC with the SD feature card installed is the
active CMC and not the standby CMC.
The feature card inserted is valid and contains the following feature(s)
FlexAddress: The feature card is bound to this chassis — Action: No action
required.
No features active on the chassis — Action: Install the SD card into the CMC.
The feature card inserted is valid and contains the following feature(s)
FlexAddress: The feature card is bound to another chassis, svctag =
ABC1234, SD card SN = 01122334455
Action: Remove the SD card; locate and install the SD card for the current chassis.
NOTE: To deactivate FlexAddress features, the chassis must be turned off.
NOTE: When the FlexAddress and FlexAddressPlus feature are active, deactivating one of them
results in deactivation of the other feature also.
CAUTION: Using the -r switch deactivates the extended storage feature, if active; reformats the SD
card in the active CMC card slot; and may Restart the active CMC.
NOTE: The —a option is not supported for CMC 5.0.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents