ABB ScreenMaster RVG200 Manual page 14

14 S C R E E N M A S T E R R V G 2 0 0 / PA P E R L E S S R E C O R D E R | C I/ R V G 2 0 0/0 0 1 - E N R E V. A
... 6 Basic setup
Change the channel configuration
1 At the System Configuration page, press the Channels icon
to display the I/O Groups 1(6) Channels page.
2 Press the icon associated with the required Group 1 (6)
Channels (for example
dialog.
IMPORTANT (NOTE)
Use the
Channels in the same process group.
3 Press the tab and then the
Setup
each field to enter and configure Setup parameters – press
to accept the content at each field.
4 Repeat for all other tabs on the Channel 1.01 (1.06) dialog
and for all other required channels.
When all fields have been configured, press
the I/O Groups 1(6) Channels page then
the System Configuration page.
5 Proceed to the next section to set up the inputs / outputs
(I/O).
Set up the inputs / outputs (I/O)
1 At the System Configuration page, press the I/O icon
open an I/O page displaying fitted I/O modules.
IMPORTANT (NOTE)
I/O modules are detected automatically.
2 Press the icon associated with the required module to
display the dialog and fields associated with that module.
3 Configure parameters for each required module.
4 When all parameters have been configured, press
return to the I/O page then
Configuration page.
5 Proceed to the next section to exit Configuration level and
save changes.
) to display the Channel 1 (01 ...06)
arrows to select different
icon associated with
to return to
to return to
to return to the System
Save current configuration and exit
1 Press at the System Configuration page – a prompt is
displayed with options to Apply Changes, Export
Configuration, Return to Configuration Mode or Discard
Changes:
System Configuration
Apply Changes
Export Configuration
Return to Configuration Mode
Discard Changes
2 Press Apply Changes (
configuration and return to the Operator page.
3 Proceed to the next section to start recording.
Start recording (archiving)
1 Open the media door and insert the external media card and
close the door.
Recording is initiated automatically.
to
to
IMPORTANT (NOTE)
Alternative archive media can be used – refer to
the Operating instructions (OI/RVG200-EN) for
compatible media types.
) to save the current