Using This Product (Connecting); Connecting The Speakers And Subwoofer - JVC CA-NXBD3 Instruction

Using this Product (Connecting)

Connecting the speakers and subwoofer

Connect the speakers to the subwoofer by connecting the colored connectors to the same color terminals on
the rear of the subwoofer.
Gray
SPEAKERS
RIGHT
FRONT SURROUND SURROUND
Red
Speaker cable
Right speaker
(rear view)
o IMPORTANT
• Improper speaker cable connection reduces the
stereo effect and sound quality.
• The supplied left/right speakers are magnetically
shielded, but color irregularity may occur on the TV
depending on some conditions. To prevent color
irregularity, set up the speakers following the
instructions below.
(The subwoofer is not magnetically shielded.)
1. Turn off the main power of the TV before
setting up the speakers.
2. Place the speakers enough distance from the
TV so that they do not cause color irregularity
on the TV.
3. Wait for approximately 30 minutes before
turning on the main power of the TV again.
Blue
LEFT
FRONT
White
Speaker cable
Left speaker
(rear view)
subwoofer (rear)
SPEAKERS
RIGHT LEFT
FRONT SURROUND SURROUND FRONT
CONNECTOR
FROM
CAUTION:SPEAKER IMPEDANCE 3 - 16 CA-NXBD3
CONNECTOR
FROM
CA-NXBD3
CAUTION
• The supplied speakers are manufactured
exclusively for use with the supplied main unit as
parts of the NX-BD3 system. Do not connect the
supplied speakers to devices other than the
supplied main unit. Doing so may damage the
speakers.
• Do not connect external speakers together with the
supplied speakers. The change in impedance may
damage the main unit and the speakers.
System cable
(supplied)
Main unit (rear)
(Continued on the next page.)
4