JVC CA-NXBD3 Instruction page 26

Changing the Radio Data System
information
You can refer to Radio Data System information in
the display window while listening to an FM radio
broadcast.
When listening to an FM radio broadcast
Press [RDS DISPLAY] repeatedly.
PS (Program Service):
While the main unit is searching for Radio Data
System information, "WAIT PS" appears and then the
radio station name is displayed in the display window.
"NO PS" appears if no signal is received.
PTY (Program Type):
While the main unit is searching for Radio Data
System information, "WAIT PTY" appears and then
the type of the broadcasted program is displayed in
the display window. "NO PTY" appears if no signal is
received.
RT (Radio Text):
While the main unit is searching for Radio Data
System information, "WAIT RT" appears and then
text messages sent by the radio station are displayed
in the display window. "NO RT" appears if no signal
is received.
NOTE
• If the main unit takes time to show the Radio Data
System information received from a radio station,
"PS", "PTY" or "RT" may appear in the display
window.
• When "PS", "PTY" or "RT" signals appear in the
display window, irregular characters and marks
may not be displayed correctly.
Searching for programs by PTY
codes (PTY search)
You can locate a type of radio program by specifying
the corresponding PTY code.
The PTY search is applicable only to the preset radio
stations.
When an FM radio broadcast is selected as the
source
1
Press [PTY SEARCH].
Display on the main unit
21
2
Press [PTY SELECT +] or
[PTY SELECT =] repeatedly to
select a PTY code while "PTY
SELECT" is flashing in the display
window.
Example: When "DOCUMENT" is selected as a PTY
code
• Refer to page 22 for the PTY codes.
3
Press [PTY SEARCH].
• While the main unit is searching for a radio
program, "SEARCH" and the selected PTY
codes is displayed in the display window.
Example: When "DOCUMENT" is selected as a PTY
code
• The main unit searches 30 preset FM radio
stations, and stops when the main unit finds
the one you have selected. At this time the
selected frequency and PTY code flash.
When [PTY SEARCH] is pressed while the
selected frequency and PTY code are flashing,
the main unit automatically starts searching for
the next radio station. After the frequency and
PTY code stop flashing or if a button is
pressed, the main unit automatically tunes in
to the radio station.
• To stop searching, press [PTY SEARCH] or
[CANCEL].
• If no program is found, "NOT FOUND" appears
in the display window and the main unit returns
to the last received radio station.