Listening To Radio Broadcasts - JVC CA-NXBD3 Instruction

Listening to radio broadcasts

FM/AM
FM MODE
TUNING +
TUNING =
PTY SEARCH
TA / News /
Info
RDS DISPLAY
* For the number button usage, refer to "Using the
number buttons" on page 12.
CAUTION
Slide the remote control mode selector
to [AUDIO].
19
Selecting a radio station
1
Example: Display when an FM radio broadcast is
Remote
control
mode
selector
J / K
PRESET =,H
PRESET +,I
ENTER
the number
2
buttons*
CANCEL
PTY SELECT
+
PTY SELECT
=
Automatic tuning
Hold down [TUNING =] or [TUNING +] until the
frequency starts changing, and then release the
button.
• When the main unit has received a broadcast, the
frequency automatically stops changing.
• You can select a specific radio station while
searching for a broadcast. Press [TUNING =] or
[TUNING +] to stop the automatic tuning when the
desired frequency appears in the display window.
NOTE
• If an FM stereo broadcast is difficult to hear
because of noise, you may be able to hear the
broadcast more easily by pressing [FM MODE] to
switch the sound to monaural reception. In this
case, the "MONO" (monaural) indicator lights up in
the display window. To return the sound to stereo
reception, press [FM MODE] again.
Press [FM/AM] to select "FM" or
"AM" in the display window.
• Each time you press [FM/AM], the band
toggles between "FM" and "AM".
• Repeatedly pressing [SOURCE] on the main
unit can also select a radio broadcast as the
source.
received
Stereo indicator
Preset number (Refer to page 20)
Press [TUNING =] or [TUNING +]
repeatedly to select a radio station.
• When the main unit has receive an FM stereo
broadcast, the "ST" (stereo) indicator lights up
in the display window.
• You can also select a radio station using the
automatic tuning.
Frequency