Using This Product (Operation); Turning On The Main Unit; Using The Number Buttons; Adjusting The Volume - JVC CA-NXBD3 Instruction

Using this Product (Operation)

M
FM/AM
DISC
AUDIO
VOL +/-
CAUTION
Slide the remote control mode selector
to [AUDIO].

Turning on the main unit

Press [A AUDIO] on the remote control
A AUDIO
or [A] on the main unit.
AUX
• Press [A AUDIO] on the remote control or [A] on
SD
the main unit again to turn off the main unit.
NETWORK
• With the power off, pressing any of the following
buttons also turns on the main unit.
Remote
- [DISC], [NETWORK], [SD], [FM/AM], [AUX], or [M]
control
on the remote control.
mode
selector
- [M], [DISC] or [NETWORK] on the main unit.
• The function assigned to the button starts working
at the same time.
ENTER
• Pressing [M] and turn the unit on, DISC will be
selected for a source.

Using the number buttons

the number
Examples:
buttons
5: [5]
15: [1]
150: [1]
• After entering the numbers, press [ENTER] or wait
for 4 seconds to confirm the entry.

Adjusting the volume

Press [AUDIO VOL +/-].
• Adjustable volume range is from 0 to 60.
• You can also adjust the volume by pressing
[VOLUME +/-] on the main unit.
NOTE
• Refer to "Adjusting the volume level for surround
rear/subwoofer sound" on page 35 for adjusting the
volume of the subwoofer.
[5]
[5] [0]
12