I n s u l a t i o n
37
M e t a l b r a i d
0 . 5 i n c h
4.
Separate the pairs of wires from one another keeping each pair
twisted together.
5.
Separate the two wires in the brown and white pair and cut the brown
wire off. It is not used by the NPU.
6.
Before starting to punch down the wires, hold the multiwire cable
over the NPU to measure at which point each wire should be punched
down. The metal braid should fit into the ground clip. You can trim
off excess wire after you have punched down all the wires.
W i r e s
2 . 5 i n c h e s
Nokia RoofTop™ Wireless Router Installation Guide