Table of Contents
Advertisement
Nokia RoofTop™ Wireless Router Installation Guide
Installing the wireless router with an integral antenna
To assemble the router and integral antenna:
The wireless router is packaged with its cover on. To be able to mount it
and to connect the D-connector, you need to remove the cover. To remove
the cover, place your fingers inside the router where the D-connector
connection is located. You can feel the latch that is holding the cover.
Release the latch and lift up the cover.
Now you can go on to assembling the router and antenna.
1.
First apply silicone lubricant on the threads of the antenna to keep it
from getting jammed. The recommended lubricant is: Dry Lubricant
PRF Tefsol.
•
Spray silicone on a rag.
•
Wipe the threads of the antenna with the rag.
Do not spray silicone directly on the threads. Only a thin coating
NOTE:
of silicone on the threads is needed and spraying them directly would
result in too much silicone on the threads.
2.
Attach the omnidirectional antenna by screwing it into the top of the
wireless router.
20
Advertisement
Table of Contents
