Material
Ethylene glycol base
coolant (Anti-freeze/
Anti-corrosion coolant)
Water tight sealant
Water Pump Inspection
CAUTION:
Do not disassemble water pump.
If any repair is required on pump, replace it as assembly.
• Rotate water pump by hand to check for smooth operation.
Engine Coolant Temperature Sensor (ECT
Sensor) Removal and Installation
Refer to "Engine Coolant Temperature Sensor (ECT Sensor)
Removal and Installation" in Section 6E2.
Engine Coolant Temperature Sensor (ECT
Sensor) Inspection
Refer to "Engine Coolant Temperature Sensor (ECT Sensor)" in
Section 6E2.
Required Service Material
Recommended SUZUKI product
(Part Number)
—
SUZUKI BOND NO. 1207F
(99000-31250)
If pump does not rotate smoothly or makes abnormal noise,
replace it.
Additive to engine cooling system for improving
cooling efficiency and for protection against
rusting.
To apply to mating surface of water pump
ENGINE COOLING (M13 ENGINE) 6B2-17
Use