Table of Contents
Advertisement
6A2-50 ENGINE MECHANICAL (M13 ENGINE)
Camshaft, Tappet and Shim Components
1. Intake camshaft
2. Intake camshaft sprocket assembly
3. Intake camshaft sprocket bolt
4. Exhaust camshaft
5. Shim
: Shim No. on it faces tappet side.
6. Tappet
7. Camshaft housing
8. Camshaft housing bolt
Tighten 11 N·m (1.1 kg-m, 8.0 lb-ft) by
the specified procedure.
Camshaft, Tappet and Shim Removal and
Installation
Removal
CAUTION:
• Keep working table, tools and hands clean while over-
hauling.
• Use special care to handle aluminum parts so as not to
damage them.
• Do not expose removed parts to dust. Keep them
always clean.
1) Remove timing chain cover referring to "Timing Chain Cover
Removal and Installation" in this section.
2) Remove timing chain referring to "Timing Chain and Chain
Tensioner Removal and Installation" in this section.
9. Upper camshaft bearing
: Install a bearing half with some holes to
upper side of intake camshaft No.1 bearing.
Tightening torque
Apply engine oil to sliding surface of each
part.
Advertisement
Table of Contents
