Suzuki Wagon R Plus RB310 Service Manual page 698

27) Remove input shaft front thrust bearing (1).
NOTE:
If input shaft front thrust bearing is not found, it may
have been taken out with oil pump assembly.
28) Remove input shaft rear thrust bearing (1) and thrust bearing
race (2).
NOTE:
If input shaft rear thrust bearing is not found, it may have
been taken out with direct clutch assembly.
29) Remove direct clutch hub (1).
30) Remove differential assembly (1) and counter shaft assem-
bly (2).
31) Remove governor apply No.2 gasket (1).
AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-129