NEC Express5800 series User Manual page 14

6 CD-ROM drive
6-1 Disk access lamp
6-2 CD tray eject button
6-3 Emergency hole
7 3.5-inch floppy disk drive
7-1 Disk access lamp
7-2 Disk slot
7-3 Eject button
8 Backup device bay
Use it to install an optional DAT or AIT drive.
9 Front monitor connector
Connect a monitor display unit to this connector.
10 Lamps (See the previous section for a description of these lamps.)
11 POWER switch
Press this switch to turn the power on/off. Pressing the switch once turnsthe power on, and the
POWER lamp goes on. Pressing it again turns the power off. Pressing the switch for 4
seconds or more turns the power off automatically.
12 UID (Unit ID) switch
Press this switch to turn the UID lamps on/off. There is a UID lamp located on the front and rear
panels of the server.
13 Reset switch
Press this switch to reset operation.
14 USB connectors (2 ports)
Connect a device compliant with the USB interface to the connectors.
15 DUMP switch (NMI switch)
Press this switch to dump memory.
4 System Overview