NEC Express5800 series User Manual page 130

Configuring Your NEC Storage NS420
Login
Use a Web browser to connect to NEC Storage NS420.
1. Start the Web browser on the client machine.
2. Specify "http://x.x.x.x:8099/" in the URL input field ("address" or "location").
"x.x.x.x," specifying the IP address of NEC Storage NS420.
3. Log in as an Administrator.
To begin configuring your NEC Storage NS420, you must login by entering
Administrator into the User Name field. Leave the Password field and Domain field
blank and click OK.
You are now ready to make changes to factory default settings to meet your particular
network, security and time- zone requirements.
Network Setup
To begin these modifications, select Network Setup.
Then select Identification
Changing the Server Name
When changing the name of your NEC Storage NS420, you may use any combination
of alpha- numeric characters (without spaces).
Delete the default server name in the Server Appliance Name field. Enter a new server
name. In the DNS suffix field, enter your Fully Qualified Domain Name (FQDN) if
applicable. You may now change the Workgroup or join a existing Domain on your
network. When joining an existing Domain, the proper entry for this field is:
DomainName\ Administrator. The User and Password fields are those required for the
Domain you are joining.
Next, click on the OK button in the lower right hand corner.
120 Configuring Your System