Add Ftp Image Connection; Write Image Ftp Settings - Cognex In-Sight 2000 Training Manual

In the Communication step you can also configure saving images from the system via FTP (File
Transfer Protocol). From the first communications configuration pane (see Fig. 37 on page 30)
select FTP. A new pane will appear in the bottom of the window with two tabs, Image and Settings.
Click the Add button in the lower left corner of the Image tab to add an FTP Image connection (Fig.
43).
Fig. 43: Add FTP Image Connection
When the connection is added you will see information given about the connection. At the right side
of this pane are the settings for the connection (Fig. 44).
Fig. 44: Write Image FTP Settings
These settings allow you to fully configure the name of the image, the image format, which images
are saved, if inspection graphics are included, adding a time stamp and a counter, if desired.
32