Mounting Procedure For Side-By-Side Flush Mounting; Mounting The Injection Unit Rex060 (Reg670 Only) - ABB RELION 670 Series Installation Manual

1MRK 514 026-UEN B
5.3.5.2
5.3.6
670 series 2.2 IEC
Installation manual

Mounting procedure for side-by-side flush mounting

2
1
IEC06000181-2-en.vsd
IEC06000181 V2 EN-US
Figure 9: Side-by-side flush mounting details (RHGS6 side-by-side with 1/2 x
19" IED).
The required torque for the screws is 3.5 Nm.
PosNo Description
1 Mounting plate
2, 3 Screw, washer
4 Mounting angle

Mounting the injection unit REX060 (REG670 only)

The injection unit REX060 case size is 6U, 1/2 x 19". REX060 can be rack, wall or
flush mounted in the same way as the IED. For guidance, see instructions for rack
mounting, wall mounting or flush mounting the IED in this manual.
REX060 shall be mounted close to the IED. It is recommended that they are
mounted in the same cubicle.
3
4
Quantity
2
16
2
GUID-264732AC-6C84-44E6-9F86-2065AD0B7D5B v3
Section 5
Mounting
M12730-6 v4
Type
-
M4x6
-
31