Applicable Cpu Modules - Mitsubishi Electric RJ71PB91V-U-IN-E User Manual

5.2

Applicable CPU Modules

The following table shows whether the RJ71PB91V can be used with CPU modules and remote head modules.
The CPU modules and remote head modules are indicated by symbols as follows.
• Rn: RnCPU
• RnEN: RnENCPU
• RnP(P): Process CPU (process mode)
• RnP(R): Process CPU (redundant mode)
• RnMT: Motion CPU
: Can be used, : Cannot be used
Model
RJ71PB91V
*1 To use the data consistency function by the refresh settings, use the firmware version 28 or later. When using the firmware version 27 or
earlier, disable the automatic refresh and the data consistency function.
*2 To use the data consistency function by the refresh settings, use the firmware version 12 or later. When using the firmware version 11 or
earlier, disable the automatic refresh and the data consistency function.
The number of mountable RJ71PB91V modules depends on the specifications of the CPU module used.
(There are no restrictions specific to the RJ71PB91V.)
For the number of mountable RJ71PB91V modules, refer to the following.
 MELSEC iQ-R Module Configuration Manual
Multiple CPU system
The RJ71PB91V supports the multiple CPU system. ( MELSEC iQ-R Module Configuration Manual)
5 SYSTEM CONFIGURATION
26
5.2 Applicable CPU Modules
Rn RnEN RnP
(P)
*1 *1 *2
  
• RnNC: NCCPU
• RnC: C Controller module
• RnSF: Safety CPU
• Rem: Remote head module
• Rem(R): Remote head module (redundant system)
RnP RnMT RnNC
(R)
  
RnC RnSF Rem
  
Rem
(R)
