Settings for DP-Master
Connect the engineering tool to the CPU module of the DP-Master, and set the parameters.
Creating a new project
1.
Set the CPU module as follows.
[Project] [New]
2.
Click the [OK] button to add the module labels of the CPU module.
3.
Set the RJ71PB91V as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
4.
To enable the data consistency function, set the items under "Basic Setting" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71PB91V] [Module Parameter] [Basic Setting]
7 COMMUNICATION EXAMPLE
32
7.1 Communication example of data exchange