Ordering; Demand; User-Programmable Leds; User-Programmable Self-Tests - GE F60 Instruction Manual

2.1 INTRODUCTION
2
Table 2–2: OTHER DEVICE FUNCTIONS
FUNCTION
Breaker arcing current (I
Breaker control
Breaker flashover
Breaker restrike
Broken conductor detection
Cold load pickup
Contact inputs (up to 96)
Contact outputs (up to 64)
Control pushbuttons
Data logger

Demand

Digital counters (8)
Digital elements (48)
Direct inputs and outputs (32)
a) OVERVIEW
The F60 is available as a 19-inch rack horizontal mount or reduced-size (¾) vertical unit and consists of the following mod-
ules: power supply, CPU, CT/VT, digital input and output, transducer input and output, and inter-relay communications.
Each of these modules can be supplied in a number of configurations specified at the time of ordering. The information
required to completely specify the relay is provided in the following tables (see chapter 3 for full details of relay modules).
Order codes are subject to change without notice. CPU modules 9G, 9H, 9L, and 9M are obsolete. See
http://www.gedigitalenergy.com/multilin/order.htm
NOTE
The order code structure is dependent on the mounting option (horizontal or vertical) and the type of CT/VT modules (regu-
lar CT/VT modules or the HardFiber modules). The order code options are described in the following sub-sections.
2-2
Figure 2–1: SINGLE LINE DIAGRAM
FUNCTION
2
t) Disconnect switches
Event recorder
Fault detector and fault report
Fault locator
FlexElements™ (8)
FlexLogic™ equations
High impedance fault detection (Hi-Z)
IEC 61850 communications (optional)
Incipient cable fault detection
Load encroachment
Metering: current, voltage, power, PF,
energy, frequency, harmonics, THD
Modbus user map
Non-volatile latches
F60 Feeder Protection System
FUNCTION
Non-volatile selector switch
Oscillography
Phasor measurement unit
Setting groups (6)
Thermal overload protection
Time synchronization over SNTP
Transducer inputs and outputs
User-definable displays

User-programmable LEDs

User-programmable pushbuttons

User-programmable self-tests

Virtual inputs (64)
Virtual outputs (96)
VT fuse failure
for the latest ordering options.
2 PRODUCT DESCRIPTION

2.1.2 ORDERING

GE Multilin