Ordering - GE F60 Instruction Manual

2.1 INTRODUCTION
52
79
2
Monitoring
50_2
50P
2
F60
Feeder Management Relay
Table 2–2: OTHER DEVICE FUNCTIONS
FUNCTION
Breaker arcing current (I
Breaker control (2)
Breaker flashover
Breaker restrike
Cold load pickup (2)
Contact inputs (up to 96)
Contact outputs (up to 64)
Control pushbuttons
Data logger
Demand
Digital counters (8)
Digital elements (48)
Direct inputs and outputs (32)
a) OVERVIEW
The F60 is available as a 19-inch rack horizontal mount or reduced-size (¾) vertical unit and consists of the following mod-
ules: power supply, CPU, CT/VT, digital input and output, transducer input and output, and inter-relay communications.
Each of these modules can be supplied in a number of configurations specified at the time of ordering. The information
required to completely specify the relay is provided in the following tables (see chapter 3 for full details of relay modules).
Order codes are subject to change without notice. Refer to the GE Multilin ordering page at
http://www.GEindustrial.com/multilin/order.htm
NOTE
The order code structure is dependent on the mounting option (horizontal or vertical) and the type of CT/VT modules (regu-
lar CT/VT modules or the HardFiber modules). The order code options are described in the following sub-sections.
2-2
CLOSE TRIP
51_2
50BF 51P/V 67P
2 2 2 2
Figure 2–1: SINGLE LINE DIAGRAM
FUNCTION
2
t) Disconnect switches (8)
Event recorder
Fault detector and fault report
Fault locator
FlexElements™ (8)
FlexLogic™ equations
High impedance fault detection (Hi-Z)
IEC 61850 communications (optional)
Incipient cable fault detection
Load encroachment
Metering: current, voltage, power, PF,
energy, frequency, harmonics, THD
Modbus user map
F60 Feeder Protection System
67_2
32 50N
2 2 2 2
TM METERING
FlexElement
50G 51G
2 2
R
for the latest details concerning F60 ordering options.
2 PRODUCT DESCRIPTION
81U
81O
51N 67N/G 32N 50NBF
2 2 2 2
27P
59P
Transducer
Inputs
59N
59_2
27X 59X
25
FUNCTION
Non-volatile latches
Non-volatile selector switch
Oscillography
Setting groups (6)
Time synchronization over SNTP
Transducer inputs and outputs
User-definable displays
User-programmable LEDs
User-programmable pushbuttons
User-programmable self-tests
Virtual inputs (64)
Virtual outputs (96)
VT fuse failure

2.1.2 ORDERING

6
4
2
1
1
1
2
832727AD.CDR
GE Multilin