Settings Templates - GE F60 Instruction Manual

4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE
2 1
3
10
4
4
5
Extended EnerVista UR Setup Features
Setting file templates simplify the configuration and commissioning of multiple relays that protect similar assets. An exam-
ple of this is a substation that has ten similar feeders protected by ten UR-series F60 relays.
In these situations, typically 90% or greater of the settings are identical between all devices. The templates feature allows
engineers to configure and test these common settings, then lock them so they are not available to users. For example,
these locked down settings can be hidden from view for field engineers, allowing them to quickly identify and concentrate
on the specific settings.
The remaining settings (typically 10% or less) can be specified as editable and be made available to field engineers install-
ing the devices. These will be settings such as protection element pickup values and CT and VT ratios.
The settings template mode allows the user to define which settings will be visible in EnerVista UR Setup. Settings tem-
plates can be applied to both settings files (settings file templates) and online devices (online settings templates). The func-
tionality is identical for both purposes.
The settings template feature requires that both the EnerVista UR Setup software and the F60 firmware are at ver-
sions 5.40 or higher.
NOTE
a) ENABLING THE SETTINGS TEMPLATE
The settings file template feature is disabled by default. The following procedure describes how to enable the settings tem-
plate for UR-series settings files.
1. Select a settings file from the offline window of the EnerVista UR Setup main screen.
4-4
6
9
Figure 4–1: ENERVISTA UR SETUP SOFTWARE MAIN WINDOW
F60 Feeder Protection System
7
8
4 HUMAN INTERFACES
842786A2.CDR

4.1.5 SETTINGS TEMPLATES

GE Multilin