Ordering - GE D60 Instruction Manual

2 PRODUCT DESCRIPTION
Table 2–2: OTHER DEVICE FUNCTIONS
FUNCTION
2
Breaker arcing current (I t)
Breaker control
Breaker flashover
Contact inputs (up to 96)
Contact outputs (up to 64)
Control pushbuttons
Data logger
Digital counters (8)
Digital elements (48)
Direct inputs and outputs (32)
Disconnect switches (16)
DNP 3.0 or IEC 60870-5-104 Comms
Event recorder
a) OVERVIEW
The D60 is available as a 19-inch rack horizontal mount or reduced-size (¾) vertical unit and consists of the following mod-
ules: power supply, CPU, CT/VT, digital input and output, transducer input and output, and inter-relay communications.
Each of these modules can be supplied in a number of configurations specified at the time of ordering. The information
required to completely specify the relay is provided in the following tables (see chapter 3 for full details of relay modules).
Order codes are subject to change without notice. Refer to the GE Multilin ordering page at
http://www.gedigitalenergy.com/multilin/order.htm
NOTE
The order code structure is dependent on the mounting option (horizontal or vertical) and the type of CT/VT modules (regu-
lar CT/VT modules or the HardFiber modules). The order code options are described in the following sub-sections.
b) ORDER CODES WITH TRADITIONAL CTS AND VTS
The order codes for the horizontal mount units with traditional CTs and VTs are shown below.
GE Multilin
FUNCTION
Fault detector and fault report
Fault locator
FlexElements™ (8)
FlexLogic™ equations
IEC 61850 communications (optional)
Line pickup
Load encroachment
Metering: current, energy, frequency,
power, power factor, voltage
Modbus user map
Non-volatile latches
Non-volatile selector switch
Oscillography
for the latest details concerning D60 ordering options.
D60 Line Distance Protection System
2.1 INTRODUCTION
FUNCTION
Pilot schemes
Setting groups (6)
Synchrophasors
Time synchronization over SNTP
Transducer inputs and outputs
Trip bus
User-definable displays
User-programmable LEDs
User-programmable pushbuttons
User-programmable self-tests
Virtual inputs (64)
Virtual outputs (96)
VT fuse failure

2.1.2 ORDERING

2
2-3