Checking Part Reel - Samsung SM421 Operation Handbook

PART VI. Additional Check Points

3. Checking part reel

Check Points
For smooth feeding of the parts, make sure the
following conditions are met when you mount the part
reel on the feeder.
50mm
If the part reel is not mounted as in the figure, index error may occur.
Caution
A
100mm
B
SM421 Operation Handbook
The tape should extend more than
100 mm from the part adhesion
100mm
point.
A
The vinyl should extend more than
50 mm from the center of the drain
gear.
50mm
B
52