Setting Conveyor - Samsung SM421 Operation Handbook

PART III. Production

2. Setting conveyor

PCB fixing method setup: Select the method to align the PCBs
3
The 'Fix Type' is selected based on the weight of the PCB. If the
weight of the PCB is more than 1kg, select the Edge Fixer 2.
PART III Production
Edge Fixer1: A method of alignment by pushing the PCB from the side
with a device attached on the conveyor.
Edge Fixer2: It is the same as the "Edge Fixer" method, but it is a method
of pushing twice from the side.
None: It uses only the PCB clamping method for fixing a PCB.
SM421 Operation Handbook
25