Overview - Operation Process - Samsung SM421 Operation Handbook

Overview

Overview - Operation Process

The overall process to operate the SM421 machine is as follows:
1. Checking the machine
before starting the machine
Air pressure Rated voltage
● ●
Foreign material inside the machine
●
Nozzle state Feeder Close doors
● ● ●
Check safety state around the machine.
●
5. Returning to origin
Press the 'Home Start' button in the
Teaching Box to return the machine to
origin.
9. Arranging the backup pins 9. Arranging the backup pins
Arrange the backup pins at appropri-
ate positions so that they can support
the bottom of the board.
2. Turning on the main switch
Turn on the main switch on the front
side of the machine clockwise to sup-
ply power to the machine.
6. Warm-up
The warm-up is performed for about
10 minutes before starting the part
placement in order to increase the
placement accuracy of the machine.
10. Creating the PCB
Select the 'Production' menu of
●
the MMI.
Select the 'Start' submenu.
●
Enter production amount in the
●
<Production Plan> edit box.
Press the 'Start' button in OperationPanel.
●
3. MMI Initialization
If the MMI is executed, the program
is initialized automatically and each
module of the machine is checked.
7. Loading the PCB file
Select and load the PCB file to work
with.
11. Finishing the production
Once the production is finished, click
the <PCB Stop> button to finish the
production.
SM421 Operation Handbook
SM421 Operation Handbook
4. Supplying the power to the
servomotor
The 'Ready' button to operate the
machine.
8. Setting the conveyor
Adjust conveyor width.
●
Set the PCB fixing method.
●
12. Turning off the machine
Press the 'Reset' button.
●
Click the <Exit> button.
●
Turn off the main switch.
●
(counterclockwise).
Put the surrounding of the working
●
area in order.
4 4
4