ABB COM600 User Manual page 66

IEC 60870-5-101
Master (OPC) 3.3
66
Station Automation COM600
User's Manual
group 3
group 4
group 5
group 6
Define addresses per group.
Clock synchronization (station-specific parameter)
Clock synchronization
Command transmission (object-specific parameter)
Direct command transmission
Direct set point command transmission
No additional definition
Short pulse duration (duration determined by a system parameter in the outstation
Long pulse duration (duration determined by a system parameter in the outstation
Persistent output
Transmission of integrated totals (station parameter or object-specific parameter)
Counter request
Counter freeze without reset
Counter freeze with reset
Counter reset
Short pulse duration (duration determ-
ined by a system parameter in the out-
station
Addresses per group have to be defined.
Parameter loading (object-specific parameter)
Threshold value
Smoothing factor
Low limit for transmission of measured value
High limit for transmission of measured value
Parameter activation (object-specific parameter)
Act / deact of persistent cyclic or periodic transmission of the addressed object.
group 10
group 11
group 12
Select and execute command
Select and execute set point command
C_SE ACTTERM used
General request counter
Reset counter group 1
Reset counter group 2
Reset counter group 3
Reset counter group 4
1MRS756703
group 16