Dimensioned Drawings, Drilling Dimensions For The Pm250 Power Module - Siemens SINAMICS G120 Operating Instructions Manual

Installing
4.3 Installing Power Modules
4.3.7

Dimensioned drawings, drilling dimensions for the PM250 Power Module

The following dimension drawings and drilling patterns are not to scale.
Frame size FSC
Table 4-16
Frame
size
FSC
BOP-2, IOP-2 or blanking cover
1)
Table 4-17
Frame
size
FSC
You can mount the Power Modules without any lateral cooling air clearance. For tolerance reasons,
1)
we recommend a lateral clearance of approx. 1 mm.
76
Dimensions depend on the operator panel (OP) that is inserted
Mounting depth in the cabinet with Control Unit (CU) [mm]
without OP
224
Cooling air clearances and fastening
Cooling air clearances [mm]
Top Bottom
125 125
1)
Front
65
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
with OP
1)
235
Fixing/torque [Nm]
4 x M5 / 3